How do you like this JEWELRY?
Have you ever wondered how they are made? Today, let's unveil its mysteries together.
Each finished product begins with original designs and thus presented by the sketches and 3D modeling.
Then, the picture would turn into a wax model with the same style and size.
As for the material, most of the jewelry is made of brass with Cuban chains made of stainless steel. They are of great hardness, intensity and good for plating.
After modeling, those samples would be sent to the polish department for 3 times of polishing, only to ensure the flatness and ready for the finishing.
Following that, the models are sent to be plated with Gold, Silver, Copper, Rhodium, etc to avoid being fade and tarnish. At Aporro, we dipped 3 times in 18K or 14K Gold plating to reach a thickness of 0.075 μm, which will help to preserve the finish for about 1~2 years.
If the jewelry is to be encrusted with diamond, then the choosing of diamond is of great importance. At Aporro, we are choosing the superior CZ stones for the jewelry's decoration. They vary from ruby, onyx to purple color which is well reflective in the sunshine. The size and color of which are strictly chosen at Aporro.
After inserting the diamonds, our quality controller would check and inspect them with a microscope one after another to make it sure that all the diamonds are encrusted perfectly.
After all the above steps, the product is finally finished and packaged separately so as to send to the distributors.
We are not playing but slaying at every step of the jewelry making. So never doubt of the quality of our products. At Aporro, we are not following normal standards, but create the new standard in the jewelry making segment. We were, are and will always bear in heart to provide you the most appealing and best of the jewelry.
Any questions, please feel free to contact us via Email: email@example.com